Nextivity CEL-FI GO G41-NE Vodafone Stationary Repeater

SKU
104-G41-NE-003

The Nextivity CEL-FI GO G41-NE Vodafone Stationary Repeater is an indoor signal booster that uplifts 3G, 4G and 5G coverage in environments where outdoor reception is weak. It captures the carrier signal via a donor antenna and applies up to 100 dB of gain over two concurrent frequency bands, then redistributes the enhanced signal indoors through a service antenna. Installers and network managers benefit from built-in echo cancellation, automatic power-level control and straightforward alignment using the Cel-Fi WAVE app over Bluetooth or Ethernet, all within a standard 0 °C to 40 °C operating range.

The GO G41 family comprises operator-specific models, each preauthorised on its target network. The 104-G41-NE-003 variant is optimised for Vodafone’s licensed bands across 700 MHz to 2600 MHz (including B1, B3, B5, B7, B8, B20, B28 and B40) with single-input single-output MIMO and up to 22 dBm of uplink power per band. It connects to a 12 V DC supply, supports up to 3,000 m2 of coverage from one unit and is aimed at small to medium commercial sites such as offices, shops and logistics hubs that require reliable, carrier-grade indoor mobile service.

$1,720

Specifications

Physical Specifications

Subtype
Inline Repeater
Ingress Protection Rating
IP20
Min. Operating Temperature
0 °C
Max. Operating Temperature
40 °C
Dimensions
260 × 107 × 63 mm
Weight
2 kg

RF Specifications

Technologies
3G UMTS
4G LTE
5G NR
LTE-M
NB-IoT
Simultaneous Bands
2
Relay Bandwidth
40 MHz
Group Delay
≤ 5.5 μs
Noise Figure
≤ 7 dB

Repeater Front End Bands

Frequency Bands MIMO Max. Channel Width Uplink Output Power Downlink Output Power
B1 (2100 MHz)
1x1 SISO
20 MHz
B3 (1800 MHz)
1x1 SISO
20 MHz
B5 (850 MHz)
1x1 SISO
15 MHz
B7 (2600 MHz)
1x1 SISO
20 MHz
B8 (900 MHz)
1x1 SISO
15 MHz
B20 (800 MHz)
1x1 SISO
20 MHz
B28 (700 MHz)
1x1 SISO
20 MHz
B40 (2300 MHz)
1x1 SISO
20 MHz

Device RF Connections

Quantity RF Connector RF Connector Function Notes
1
SMA Female
Donor Input
1
SMA Female
Service Output

Networking

Network Connections

Ethernet

Ethernet Connections

Quantity Ethernet Interface Ethernet Connector Function PoE Input PoE Output Signalling Max. PoE Per Port
1
RJ45 Jack
LAN
100BASE-T

Bluetooth

Bluetooth Version
Bluetooth 4.2

Power

Max. Consumption
40 W
Power Options
DC Power Input

Power Input Details

Power Connector Voltage (Nominal) Min. Input Voltage Max. Input Voltage Voltage Type
DC Coaxial, Type A, Female 5.5 x 2.5 mm
12 Vdc
9 V
13 V
DC

Brand

Nextivity

Nextivity, Inc. develops and sells in-building cellular coverage technology products and solutions. The Company helps wireless subscribers and increases radio frequency network capacity for mobile network operators. Nextivity operates in the State of California.

Nextivity is best known for its Cel-Fi range of mobile repeater solutions which provide low cost improved in-building coverage solutions.

Dimensions

6 × 10 × 27 cm

Weight

2 kg